When a cable just punches a hole, jetting scrubs the pipe wall back to bare. We blast away years of grease, scale, sludge, and roots with up to 4, 000 PSI of water, camera-verified before and after, across Northern Virginia.
No job too big or too small. We answer 24/7, Mon–Fri.
● When Snaking Isn't Enough
Signs your line needs a jetting.
Some clogs come back no matter how many times they’re snaked, because the pipe wall is still coated. If any of these sound familiar, your line is a candidate for hydro jetting.
Clogs that keep coming back
Snaking a line every few months is a sign the build-up was never removed, only bored through.
Grease-packed kitchen lines
Restaurant and heavy-use kitchen drains glaze with grease a cable slides right through. Jetting scours it off.
Tree roots in the line
Roots invade older sewer pipes through joints. High-pressure water cuts them back and flushes them out.
Whole-house slow drains
When every fixture drains slowly, the main line is coated end to end, exactly what jetting is built for.
Persistent sewer odor
A lingering smell means rotting build-up is clinging to the pipe. Jetting flushes the residue chemicals can’t.
Before a property turnover
Buying, selling, or opening a commercial space? A jetting resets the lines to bare pipe, a clean slate.
● How Jetting Works
Inspect, jet, verify.
Hydro jetting is powerful, so we never aim blind. We inspect the pipe first, confirm it can take the pressure, clean it wall-to-wall, then prove the result on camera.
01
Camera inspection
We send an HD camera down first to locate the build-up and confirm the pipe’s condition and material.
02
Set the pressure
We dial in the right PSI and nozzle for your line, enough to clear it, never enough to harm sound pipe.
03
Jet wall-to-wall
High-pressure water scours grease, scale, sludge, and roots off the full pipe wall and flushes it downstream.
04
Verify on camera
A final camera pass shows bare pipe end to end, you see the before and after for yourself.
● Jetting vs. Snaking
When jetting is the right call.
A snake is perfect for a one-off clog. Jetting is what you want when the pipe wall itself is the problem. Here’s how they stack up, and we’ll always tell you honestly which one your line needs.
Hydro Jetting
Snaking
What it does
✓ Scours the full pipe wall back to bare
Bores a hole through the blockage
Grease & scale
✓ Removes it completely
Leaves coating on the walls
Tree roots
✓ Cuts and flushes them out
Punches through, roots regrow
How long it lasts
✓ Months to years
Often weeks on coated lines
Best used for
✓ Main lines, grease, roots, heavy build-up
Single, soft, everyday clogs
Our honest take: if a snake will fix it, we'll snake it. Jetting is for lines that need the deep clean.
● What Jetting Removes
Blasted out, wall to wall.
Years of build-up that a cable can’t touch, cleared in a single visit, residential or commercial.
Repeat snaking adds up. One thorough jetting clears the line to bare pipe and keeps it flowing for far longer, and we prove it on camera before we leave.
“We jet the kitchen line at our restaurant twice a year now, Steven cleared a grease blockage three other guys couldn't, showed us the before and after on camera, and we haven't had a backup since.”
Marcus Reyes · Commercial customer, Manassas
Lines coated with build-up? Jet them clean.
Tell us what’s going on, we answer 24 hours a day, Monday through Friday.